Please review the following information before scheduling your appointment below. Automated deployment and zero touch deployment, 17.4 in (44.19 cm) for desktop installations, 17.5 in (44.6 cm) with rack-mount brackets, Height: 1.75 in (4.45 cm) for 1U installations, 80 Gbps Virtual Chassis interconnect to link up to four switches as a single logical device (EX2300-24/48T/P and EX2300-24/48 MP models), Operating temperature: 32 to 113 F (0 to 45 C), Storage temperature: -40 to 158 F (-40 to 70 C), Operating altitude: up to 13,000 ft (3962 m) at 40 C according to GR-63, Non-operating altitude: up to 15,000 ft (4572 m), Relative humidity operating: 10% to 85% (noncondensing), Relative humidity non-operating: 0% to 95% (noncondensing), EX2300-24P/24T/24MP: 28 (24 host ports + four-port SFP/SFP+ uplinks), EX2300-48P/48T: 52 (48 host ports + four-port SFP/SFP+ uplinks), EX2300-48MP: 54 (48 host ports + six-port SFP/SFP+ uplinks), GbE SFP optic/connector type: RJ-45, or LC SFP fiber supporting 1000BASE-T SFP, SX (multimode), LX (singlemode), or LH (single-mode), Physical port redundancy: Redundant trunk group (RTG), Cable diagnostics for detecting cable breaks and shorts, Auto MDI/MDIX (medium-dependent interface/mediumdependent interface crossover) support, Port speed downshift/setting maximum advertised speed on 10/100/1000BASE-T ports, Digital optical monitoring for optical ports, EX2300-24P/24T: 64 Gbps (unidirectional)/128 Gbps (bidirectional), EX2300-24MP: 76 Gbps (unidirectional)/ 152 Gbps (bidirectional), EX2300-48P/48T: 88 Gbps (unidirectional)/176 Gbps (bidirectional), EX2300-48MP: 132 Gbps (unidirectional)/264 Gbps (bidirectional), EX2300-24P/24T/24MP: 95 Mpps (wire speed), EX2300-48P/48T/48MP: 130 Mpps (wire speed), Maximum MAC addresses in hardware: 16,000, Number of VLANs supported: 4093 (2044 active VLAN), IEEE 802.1ak: Multiple VLAN Registration Protocol (MVRP), Compatible with Per-VLAN Spanning Tree Plus (PVST+), IEEE 802.1AB: Link Layer Discovery Protocol (LLDP), IEEE 802.1s: Multiple Spanning Tree Protocol (MSTP), IEEE 802.1w: Rapid Spanning Tree Protocol (RSTP), IEEE 802.3ad: Link Aggregation Control Protocol (LACP), Maximum number of IPv4 unicast routes in hardware: 512 prefixes; 4,096 host routes, Maximum number of IPv4 multicast routes in hardware: 2,048 groups; 2,048 multicast routes, Bidirectional Forwarding Detection (BFD) with slow timers (> 3 sec), Maximum number of Neighbor Discovery (ND) entries: 1,500, Maximum number of IPv6 unicast routes in hardware: 512 prefixes; 2,048 host routes, Maximum number of IPv6 multicast routes in hardware: 1,024 groups; 1,024 multicast routes, Neighbor discovery, system logging, Telnet, SSH, SNMP, Network Time Protocol (NTP), Domain Name System (DNS), Routing protocols: RIPng, OSPF v3, Multicast Listener Discovery, Multicast Listener Discovery v2, Port-based ACL (PACL)256 ingress; 256 egress, VLAN-based ACL (VACL) 256 ingress; 256 egress, Router-based ACL (RACL)256 ingress; 512 egress, ACL entries (ACE) in hardware per system: 2,000, Ability to add/remove/change ACL entries in middle of list (ACL editing), Allowed MAC addressesconfigurable per port, Sticky MAC (persistent MAC address learning), 802.1X with authentication bypass access (based on host MAC address), 802.1X dynamic ACL based on RADIUS attributes, 802.1X Supported EAP types: Message Digest 5 (MD5), Transport Layer Security (TLS), Tunneled Transport Layer Security (TTLS), Protected Extensible Authentication Protocol (PEAP), Ingress policing: one-rate two-color; two-rate three-color markers, Scheduling methods (egress): Strict Priority (SP), shapeddeficit weighted round-robin (SDWRR), 802.1p, DSCP /IP precedence trust and marking, L2-L4 classification criteria: Interface, MAC address, EtherType, 802.1p, VLAN, IP address, DSCP/IP precedence, TCP/UDP port numbers, Congestion avoidance capabilities: Tail drop and WRED, Out-of-band management: Serial, 10/100BASE-T Ethernet, Simple Network Management Protocol (SNMP): v1, v2c, v3, Remote monitoring (RMON) (RFC 2819) Groups 1, 2, 3, 9, RFC 783 Trivial File Transfer Protocol (TFTP), RFC 792 Internet Control Message Protocol (ICMP), RFC 1256 IPv4 ICMP Router Discovery (IRDP), RFC 1519 Classless Interdomain Routing (CIDR), RFC 1812 Requirements for IP Version 4 routers, RFC 2030 Simple Network Time Protocol (SNTP), RFC 2131 BOOTP/DHCP relay agent and DHCP server, RFC 2474 DiffServ Precedence, including 8 queues/port, RFC 2597 DiffServ Assured Forwarding (AF), RFC 2598 DiffServ Expedited Forwarding (EF), RFC 2710 Multicast Listener Discovery Version (MLD) for IPv6, RFC 2925 Definitions of Managed Objects for Remote Ping, Traceroute, and Lookup Operations, RFC 3579 RADIUS Extensible Authentication Protocol (EAP) support for 802.1X, RFC 5176 Dynamic Authorization Extensions to RADIUS, LLDP Media Endpoint Discovery (LLDP-MED), ANSI/TIA1057, draft 08, RFC 1155 Structure of Management Information (SMI), RFC 1212, RFC 1213, RFC 1215 MIB-II, Ethernet-like MIB, and TRAPs, RFC 1905 RFC 1907 SNMP v2c, SMIv2 and Revised MIB-II, RFC 2011 SNMPv2 Management Information Base for the IP using SMIv2, RFC 2012 SNMPv2 Management Information Base for the Transmission Control Protocol using SMIv2, RFC 2013 SNMPv2 Management Information Base for the User Datagram Protocol using SMIv2, RFC 2464 Transmission of IPv6 Packets over Ethernet Networks, RFC 2570-2575 SNMPv3, User-based Security, Encryption, and Authentication, RFC 2576 Coexistence between Version 1, Version 2, and Version 3 of the Internet-standard Network Management Framework, RFC 2578 SNMP Structure of Management Information MIB, RFC 2579 SNMP Textual Conventions for SMIv2, RFC 2665 Definitions of Managed Objects for the Ethernet-like Interface Types, RFC 3414 User-based Security Model for SNMPv3, RFC 3415 View-based Access Control Model (VACM) for SNMP, RFC 3484 Default Address Selection for IPv6, RFC 3810 Multicast Listener Discovery Version 2 (MLDv2) for IPv6, RFC 4213 Basic Transition Mechanisms for IPv6 Hosts and Routers, RFC 4363 Definitions of Managed Objects for Bridges with Traffic Classes, Multicast Filtering, and VLAN Extensions, RFC 4443 ICMPv6 for the IPv6 Specification, RFC 4862 IPv6 Stateless Address Autoconfiguration, Draft reeder - snmpv3 usm - 3desede -00, Debugging: CLI via console, telnet, or SSH, Diagnostics: Show and debug command statistics, Mirroring destination ports per system: 4, Multiple destination ports monitored to 1 mirror (N:1), Mirroring to remote destination (over L2): 1 destination VLAN, Encapsulated Remote Switched Port Analyzer (ERSPAN), C-UL to CAN/CSA 22.2 No.60950-1 (Second Edition), CB-IEC60950-1 (Second Edition with all country deviations), Reduction of Hazardous Substances (ROHS) 6, Enhanced limited lifetime switch hardware warranty. Virtual Chassis technology simplifies network management for smaller deployments. Multiple EX2300 models are available, including versions offering multigigabit (up to 2.5 Gbps) PoE+ access ports that can accommodate higher-speed IEEE 802.11ac Wave 2 access points, enabling the switches to support more wireless users. In the future this virtual chassis will be extended with one or two EX2300-24P. The Following Are Compatible With Juniper Networks EX2300-VC, See All 16 Products Compatible with this Product, Products Related to Juniper Networks EX2300-VC, Designed For: EX2300-24P, EX2300-24T, EX2300-48P, EX2300-48T. And perform software upgrades easily through Juniper Mist cloud. A dedicated rear panel RJ-45 Ethernet port is available for outof-band management, while a rear panel USB port can be used to easily upload the Junos OS and configuration files. The EX2300 Ethernet Switch delivers a compact, high-density, cost-effective solution for small network environments where space and power are at a premium. Users can select from the existing profiles or create their own and apply them through the command-line interface (CLI), J-Web Software interface, or management system. For the EX2300-24P it's clear that this is the EX2300-VC license. The premium license is a superset and includes all the features from the advanced license and additional features. EX2300 VIRTUAL CHASSIS LICENSE - hssl.us Free Shipping! Please check the quantity you are adding and try again. Based on existing, field-proven Juniper Networks technology, the PFE brings the same level of carrier-class performance and reliability to the EX2300 switches that Juniper Networks routers bring to the worlds largest service provider networks. Juniper also offers a comprehensive suite of network management tools that provide a smart, simple, and open approach for automating the deployment and operation of a Juniper infrastructure. All rights reserved. By utilizing a common operating system, Juniper delivers a consistent implementation and operation of control plane features across all products. Virtual Chassis technology enables up to four interconnected EX2300 switches to form a single logical device. By continuing to use our site, you give consent for cookies to be used. Flex Advanced and Premium subscription licenses also allow portability across the same tier and class of switches, ensuring investment protection for the customer. Additional features can be unlocked with the purchase of a Flex Advanced or Flex Premium license. View Tech Specs. Buy a Juniper Networks Virtual Chassis license at CDW.com Select EX2300 models also support the 802.3af Class 3 Power over Ethernet (PoE) and 802.3at PoE+ standards for supporting networked devices such as telephones, video cameras, IEEE 802.11ac WLAN access points, and videophones in converged networks. You may be able to save even more on your order if you meet the following Juniper Networks BIG DEAL qualifications: Learn more by visiting the manufacturer's website. Junos Fusion Enterprise deployment using EX2300 switches as satellite devices. Switches can be added to or removed from the Virtual Chassis configuration without service disruption. ago Posted by wdennis What does "set virtual-chassis vc-port" do? Simplified onboarding and management with Juniper Mist Wired Assurance. For smaller networks, up to four EX2300 switches can be interconnected in a Virtual Chassis configuration, allowing them to be managed as a single switch. Day 2 operations Leverage the AI in Juniper Mist Wired Assurance to meet service-level expectations such as throughput, successful connects, and switch health with key pre- and post-connection metrics (see Figure 1). Low power consumption, low acoustic fans, and a small 10-inch deep footprint enable flexible, environmentally friendly deployment. Juniper Networks Virtual Chassis license - EX2300-VC - Network Management -. When managing a group of EX2300 switches, the Junos Space platform and associated applications provide network-level management across all Juniper Networks switches from a single console. The EX2300 and EX3400 devices come with a 2GB of storage space. Only the routing-engines require a VC license per the rep. Two system management options are available for the EX2300 line. Explicitly designed to allow partners and customers to build and deploy smart, simple, and easy-touse applications, Junos Space provides multiple management and infrastructure applications for managing Juniper resources and assets, including inventory management, device and interface configuration, automated software management and deployment, and event-driven fault management. While EX2300 switches can be interconnected over any of the front-panel uplink ports using standard 10GbE SFP+ transceivers (sold separately), these ports can also be configured as 1GbE/10GbE uplinks to aggregation devices by disabling the Virtual Chassis technology. Virtual Chassis User Guide for Switches - Juniper Networks Juniper Mist Wired Assurance, a cloud-based service driven by Mist AI to claim, configure, manage, and troubleshoot the EX2300, delivers AI-powered automation and service levels to ensure a better experience for connected devices. The EX2300 switches run the same Junos OS that is used by other Juniper Networks EX Series Ethernet Switches, QFX Series Switches, Juniper Routers, Juniper SRX Firewalls, and the Juniper NFX Series Network Services Platform. For small networks, up to four EX2300 switches can be interconnected in a Virtual Chassis configuration, allowing them to be managed as a single switch. The Department encourages all eligible customers to conduct their driver license services online. PDF Juniper EX2300 Switches for Lenovo with Power over Ethernet (withdrawn 1999 -2023 Juniper Networks, Inc. All rights reserved. Texas Driver Licenses and IDs, Renewals, and Replacements From what I understand it's possible to do this. Select Another feature, called automatic software download, enables network administrators to easily upgrade the EX2300 using the DHCP message exchange process to download and install software packages. It's possible to buy a licensethat only permits VC; or a license that permits VC + various enhanced features. The EX2300 switchs 10-inch/12-inch depth and low acoustics also make it ideal for open office deployments. The EX2300 is onboarded, provisioned, and managed in the Juniper Mist Cloud Architecture. The EX2300 switches run the same Junos OS that is used by other Juniper Networks EX Series Ethernet Switches, QFX Series Switches, Juniper Routers, Juniper SRX Firewalls, and the Juniper NFX Series Network Services Platform. By providing a full 15.4 watts of Class 3 PoE to VoIP telephones, closed-circuit security cameras, wireless access points, and other IP-enabled devices, the EX2300 delivers a future-proofed solution for converging disparate networks onto a single IP infrastructure. And people are taking notice. The EX2300 provides the highest levels of flexibility and features in its class for the most demanding converged data, voice, and video environments, delivering a reliable platform for unifying enterprise communications. Use the following requirements and guidelines to plan the devices to include in your Virtual Chassis: EX2300 switches: In Junos OS releases prior to 18.4R1, you can interconnect EX2300 and EX2300-C switches into a Virtual Chassis, or you can interconnect EX2300 multigigabit model switches (EX2300-24MP and EX2300-48MP) into a Virtual Chassis. These switches run the same Junos image and support all the same software features as other EX2300 models. A zero touch provisioning (ZTP) feature allows a DHCP server to push configuration details and software images to multiple switches at boot-up time. Juniper Licensing User Guide | Licensing | Juniper Networks The addition of Marvis, a complementary Virtual Network Assistant driven by Mist AI, lets you start building a self-driving network that simplifies network operations and streamlines troubleshooting via automatic fixes for EX Series switches or recommended actions for external systems. By utilizing a common operating system, Juniper delivers a consistent implementation and operation of control plane features across all products. Virtual Chassis doesnt require a license in any EX series. Wired Assurance offers the following features: Figure 1: Juniper Mist Wired Assurance service-level expectations, Figure 2: Marvis Actions for wired switches. In general, EX Access switch licenses are only required on 2 members of any VC - Master and Backup. Copyright 2020 Elevate Community | Juniper Networks. Virtual Chassis*We've included Virtual Chassis license in the Standard license model on EX2300-C 12-port switches. Concerning licensingI've read that each individualswitch in the virtual chassis must have a VC license installed. It also supports cross-member link aggregation, which allows redundant link aggregation connections between devices in a single Virtual Chassis configuration, providing an additional level of reliability and availability. Provantage is an authorized Juniper Networks dealer. The EX2300 also includes the integrated J-Web interface, an embedded Webbased device manager that allows users to configure, monitor, troubleshoot, and perform system maintenance on individual switches via a browser-based graphical interface. The confusion for me is that different sources give different information. You need to purchase the license separately. This is Junipers time. The Juniper Networks EX2300 Ethernet Switch offers an economical, entry-level, standalone solution for accesslayer deployments in branch and remote offices, as well as enterprise campus networks. The EX2300 is onboarded, provisioned, and managed in the Juniper Mist Cloud Architecture. If your EX2300-C for some odd reason requires a license, the EFL license will cost you more, than just upgrading the hardware to e.g. Another feature, called automatic software download, enables network administrators to easily upgrade the EX2300 using the DHCP message exchange process to download and install software packages. These files can be used to reboot the switch at the next power-up or as a backup boot option. Low power consumption, low acoustic fans, and a small 10-inch deep footprint enable flexible, environmentally friendly deployment. With a small, 1 U footprint, the EX2300 is perfect for access-layer deployments in micro branches, retail and workgroup environments, and . Due to the size, weight and delicate nature of Data and Server Cabinets, specialist couriers are required so they arrive on site in pristine condition. To ease deployment, the EX2300 supports the industrystandard Link Layer Discovery Protocol (LLDP) and LLDPMedia Endpoint Discovery (LLDP-MED) protocol, enabling the switches to automatically discover Ethernet-enabled devices, determine their power requirements, and assign virtual LAN (VLAN) membership. If access is granted, the switch provides access to the network based on authorization attributes sent by the authentication server. It is designed for customers who need to cost-effectively deploy numerous switch ports throughout their enterprise campus network and manage them all from a central device. Support for L2 protocols as well as L3 protocols like RIP and static routing are included in the base license. Models offering 24 and 48 multigigabit ports support 1GbE/2.5GbE on 8 and 16 ports, respectively. The Juniper Mist Cloud streamlines deployment and management of campus fabric architectures by allowing: Automated deployment and zero touch deployment. It sets a new standard moving away from traditional network management towards AI-driven operations, while delivering better experiences to connected devices. Standard tier features are available with the Junos OS image that ships with EX Series switches. All features are fully regression-tested, making each new release a true superset of the previous version. Complete Layer 2 and basic Layer 3 switching capabilities are available. Driver License Services - Appointments | Department of Public Safety Discover cloud delivered or on-premise offerings. Using Juniper Networks EX9200 line of programmable switches as aggregation devices and EX2300 switches as satellite nodes, Junos Fusion Enterprise technology can be deployed across a building (or multiple buildings) to connect large numbers of switches in a fabric that can be managed as a single device. IEEE 802.11ac Wave 2 access points require switch ports capable of handling up to 2.5 Gbps in order to support the growing number of wireless devices and the amount of traffic they produce. In addition, a feature called system snapshot makes a copy of all software files used to run the switchincluding the Junos operating system, the active configuration, and the rescue configuration. Switches can be added to or removed from the Virtual Chassis configuration without service disruption. The functionality is available by default. Mist Wired Assurance delivers better experiences for connected devices through AI-powered automation and service levels. By using a consistent operating system and a single configuration file, all switches in a Virtual Chassis configuration are treated as a single device, simplifying overall system maintenance and management. These attributes are fundamental to the core value of the software, enabling all Junos OS-powered products to be updated simultaneously with the same software release. These tools are based on a single network application platform called Juniper Networks Junos Space, an open, programmable application platform for hosting network infrastructure and operational applications across the entire management life cycle of the network. The ZTP feature allows a DHCP server to push configuration details and software images to multiple switches at boot-up time. Explore options and offers to connect with the networking solution you need. Celebrating innovators who use Juniper solutions to make a difference in the world. Modular Junos OS prevents a switch reboot if a single protocol feature fails. In addition, the EX2300 supports rich quality-of-service (QoS) functionality for prioritizing data, voice, and video traffic. The Junos OS software can also be preinstalled on a flash drive and used to boot the EX2300 at any time. Juniper Networks Virtual Chassis - license - EX2300-VC - CDW Each EX2300 switch supports four fixed front-panel 1GbE/10GbE uplink ports (six 1/10GbE uplink ports on the 48-port multigigabit model) with pluggable optics (purchased separately) for high-speed backbone or link aggregation connections between wiring closets and upstream aggregation switches.

Count The Values Associated With Key In A Dictionary, When Does Rowan County Schools Start Back, Bedford School District, 2530 Magnolia Way, Morgan Hill, Articles E